This large and decorative Solid Copper hanger style bail is great for displaying components that have a large hole, larger round donuts. There is a spiral pattern on the front that fits nicely in the donut hole. The overall size is about 33x10mm (without the spiral, the size is about 26mm overall). The loop at the top of the bail has an opening of about 3.5mm in diameter. The back of the finding is narrower than the front (about 2mm), but your component must have at least a 5.5mm hole to allow the top loops to fit through. Sold individually.
These donut hangers will fit a range of donut sizes. Our example shows a 40mm Snowflake Obsidian donut, but this holder probably will typically fit donuts up to about 45mm. There is about 21mm of space within the bail, so the distance from the outer edge of the donut to the edge of the hole must be less than that. Donuts that are wider than that or are very thick may fit in the hanger, but the bail may not close enough to allow the loops to line up (adding a copper jump ring can help secure them, but may not be the appearance that you desire). Since they are made from Solid copper, the bails are fairly soft and can be formed to fit around your pendant to some extent.
While these hanger bails are designed to opened wide enough to slip the donut over the loops, repeated opening and closings or opening the bail past about 45 degrees can cause the material to crack.
